Porsche 911 TURBO - 1975 WORSHOP, Руководство пользователя

Страница: 222 / 252

222
Practical Tips, Minor Repairs
3. Place socket wrench (tool kit) on the unlocking
spindle.
The handle of the wrench should point
horizontally to the rear.
4. Turn socket wrench approx. 180°, see A . The
headlight is unlocked and pushed forward
slightly during this process.
5. Turn socket wrench back until it is pointing
vertically downward
B
and leave in position.
6. The headlight is now unlocked and can be
pulled forward out of the wing.
Installing headlights
1. Insert headlight into the guide rails and push
fully into the wing.
2. Push headlight to the rear and at the same
time turn the socket wrench until it points
horizontally to the rear C .
The headlight locking device must perceptibly
and audibly engage.
3. Insert rubber plug into the unlocking opening
and secure the carpeting.
Check the function of all lights.
Dipped beam, high beam and additional
high beam
Opening the lid of the headlight housing
1. Unscrew the 4 screws
A
.
2. First lift release tab B , then push both release
tabs C upwards and take off lid.