Porsche 911 TURBO - 1975 WORSHOP, Руководство пользователя

Страница: 206 / 252

206
Practical Tips, Minor Repairs
Warning!
The sealant is highly flammable and harmful
to health.
f
Fire, naked flame and smoking are prohibited
when handling tyre sealant.
f Avoid contact with skin, eyes or clothing.
f Keep tyre sealant away from children.
f Do not inhale vapours.
In case of contact with the sealant:
f If sealant gets on the skin or in the eyes,
thoroughly rinse the affected part of the body
off or out without delay.
f
Change soiled clothing immediately.
f
Visit a doctor immediately in the event of an
allergic reaction.
f If sealant was swallowed, thoroughly rinse out
the mouth without delay and drink plenty of
water.
Do not induce vomiting.
See a doctor immediately.
A - Filler bottle
B - Filler hose
C - Plug of the filler hose
D - Valve turner
E - Valve insert
F
- Tyre valve
Filling in sealant
1.Leave the object that caused the puncture in
the tyre.
2.Remove compressor, sealant and the
enclosed sticker from the luggage compart-
ment.
3.Adhere the sticker in the driver's field of vision.
4.Shake filler bottle
A .
5.Screw filler hose B onto the filler bottle. The
filler bottle is now open.
6.Unscrew valve cap from tyre valve F .
7.Remove valve insert E from the tyre valve with
valve turner
D
.
Keep the valve insert in a clean and dry place.
8.Remove plug C of filler hose B .
9.Push filler hose onto the tyre valve.
10.Hold filler bottle higher than the level of the tyre
valve and squeeze it forcefully until the bottle
is completely emptied into the tyre.
11.Pull filler hose off the tyre valve.
12.Twist the valve insert firmly into the tyre valve
using the valve turner.
13.Connect the compressor to the cigarette
lighter and inflate the tyre to the prescribed
tyre pressure.
Please observe the chapter “TYRE
PRESSURES FOR COLD TYRES” on page 240.
14.Screw valve cap onto the tyre valve.
15.Check the tyre pressure after driving for
around 10 minutes.
If the tyre pressure is less than 1.5 bar
(22 psi), do not continue driving.
If a value of more than 1.5 bar (22 psi) is
indicated, correct the pressure to the
prescribed value.