Porsche 911 TURBO - 1975 WORSHOP, Руководство пользователя

Страница: 140 / 252

140
Controls, Safety, Instruments
To reprogram a single button:
1. Press the desired button until the light-emitting
diode begins to flash slowly (approx.
20 seconds).
You then have approx. 5 minutes to perform
steps 2 and 3.
2. Hold the original hand-held transmitter approx.
0 to 30 cm in front of the marked position (illus-
tration) on the vehicle.
3. Press the transmit button on the original hand-
held transmitter until the fog lights flash three
times (up to approx. 45 seconds).
4. Repeat steps 1 to 3 to allocate other buttons.
Note
Several attempts with different distances between
the vehicle and the hand-held transmitter might be
necessary.
The fog lights will flash once if the 5 minutes have
been exceeded. Programming must be repeated
from the beginning in this case.
Deleting programmed signals of the
HomeLink
(e.g. when selling the vehicle)
f
Keep the two outer buttons 1 and 3
depressed for approx. 20 seconds until light-
emitting diode
A
begins to flash quickly.
All programmed signals of buttons 1 to 3 are
deleted.