Porsche 911 TURBO - 1975 WORSHOP, Руководство пользователя

Страница: 208 / 252

208
Practical Tips, Minor Repairs
Changing a Wheel
Warning!
Risk of injury. The vehicle may slip off the
jack.
f Make sure that no one is in the vehicle when
jacking up and changing a wheel.
f
Only use the jack to raise the car for wheel
changing.
f Always place the vehicle on stable supports if
work has to be carried out under the vehicle.
The car jack is not suitable for this.
Note
The tools required for changing a wheel (e.g. jack,
wheel bolt wrench, assembly aids) are not
supplied as standard with the car. Your Porsche
partner will be pleased to advise you.
1. Apply the handbrake fully and engage 1st gear
or Tiptronic selector lever position P and
remove the key from the ignition.
2. Secure the car against rolling away, e.g. by
means of wedges under the wheels on the
opposite side.
This is particularly important on slopes.
3. Slightly slacken the wheel bolts of the wheel to
be changed.
4. Raise the car until the wheel lifts off the
ground. Lift vehicle only at the specified
jacking points.
f
Please observe the chapter “LIFTING THE
VEHICLE WITH A LIFTING PLATFORM OR
TROLLEY JACK” on page 207.
5. Remove 1 or 2 wheel bolts (see corresponding
figure). Screw in assembly aids instead of
wheel bolts.
Remove the remaining wheel bolts.
For vehicles without PCCB, screw in assembly aid
Caution!
Risk of damage to the brake discs.
f Always screw in the assembly aids when
changing a wheel.