Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 65

Страница: 65 / 557

User’s Manual of WGSD-10020 Series

4.2.12 Detailed Log

The switch system detailed log information is provided here. The Detailed Log screen in

Figure 4-2-15

appears.

Figure 4-2-15

Detailed Log page screenshot

The page includes the following fields:

Object

Description



The ID (>= 1) of the system log entry.



Message

The message of the system log entry.

Buttons

: Click to refresh the page; any changes made locally will be undone.

: Updates the system log entries, starting from the first available entry ID.

: Updates the system log entries, ending at the last entry currently displayed.

: Updates the system log entries, starting from the last entry currently displayed.

: Updates the system log entries, ending at the last available entry ID.

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 65 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: