Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 204

Страница: 204 / 557

User’s Manual of WGSD-10020 Series

Disabled

: Port shut down is disabled for the ACE.



Counter

The counter indicates the number of times the ACE was hit by a frame.



Modification Buttons

You can modify each ACE (Access Control Entry) in the table using the following

buttons:

: Inserts a new ACE before the current row.

: Edits the ACE row.

: Moves the ACE up the list.

: Moves the ACE down the list.

: Deletes the ACE.

: The lowest plus sign adds a new entry at the bottom of the ACE listings.

Buttons

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh occurs at regular intervals.

: Click to refresh the page; any changes made locally will be undone.

: Click to clear the counters.

: Click to remove all ACEs.

4.10.3 ACE Configuration

Configure an ACE (Access Control Entry) on this page.

An ACE consists of several parameters. These parameters vary according to the frame type that you select. First select the

ingress port for the ACE, and then select the frame type. Different parameter options are displayed depending on the frame type

selected.

A frame that hits this ACE matches the configuration that is defined here. The ACE Configuration screen in

Figure 4-10-3

appears.

204

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 204 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: