manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 121 / 557

Поделиться
Скачать
Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 121

User’s Manual of WGSD-10020 Series 

 

The Private VLAN screen in 

Figure 4-6-6

 appears. 

 

 

Figure 4-6-6

 Private VLAN Membership Configuration page screenshot 

 

The page includes the following fields: 

Object 

Description 

 

Delete 

To delete a private VLAN entry, check this box. The entry will be deleted during 

the next save. 

 

Private VLAN ID 

Indicates the ID of this particular private VLAN. 

 

Port Members 

A row of check boxes for each port is displayed for each private VLAN ID. To 

include a port in a Private VLAN, check the box. To remove or exclude the port 

from the Private VLAN, make sure the box is unchecked. By default, no ports are 

members, and all boxes are unchecked. 

 

Buttons 

: Click to add new VLAN. 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

 

 

4.6.9 Port Isolation 

Overview 

When a VLAN is configured to be a private VLAN, communication between ports within that VLAN can be prevented. Two 

application examples are provided in this section: 

  Customers connected to an ISP can be members of the same VLAN, but they are not allowed to communicate with each 

other within that VLAN. 

  Servers in a farm of web servers in a Demilitarized Zone (DMZ) are allowed to communicate with the outside world and 

with database servers on the inside segment, but are not allowed to communicate with each other 

 

121 

 

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов