manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 225 / 557

Поделиться
Скачать
Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 225

User’s Manual of WGSD-10020 Series 

 

this setting. The value can only be changed if the Guest VLAN option is globally 

enabled. 

Valid values are in the range [1; 255]. 

 

Allow Guest VLAN if 

EAPOL Seen 

The switch remembers if an EAPOL frame has been received on the port for the 

life-time of the port. Once the switch considers whether to enter the Guest VLAN, 

it will first check if this option is enabled or disabled. If disabled (unchecked; 

default), the switch will only enter the Guest VLAN if an EAPOL frame has not 

been received on the port for the life-time of the port. If enabled (checked), the 

switch will consider entering the Guest VLAN even if an EAPOL frame has been 

received on the port for the life-time of the port. 

The value can only be changed if the Guest VLAN option is globally enabled. 

 

Port Configuration 

The table has one row for each port on the selected switch in the stack and a number of columns, which are: 

Object 

Description 

 

Port 

The port number for which the configuration below applies. 

 

Admin State 

If NAS is globally enabled, this selection controls the port's authentication mode. 

The following modes are available: 

 

Force Authorized 

In this mode, the switch will send one EAPOL Success frame when the port link 

comes up, and any client on the port will be allowed network access without 

authentication.  

 

Force Unauthorized 

In this mode, the switch will send one EAPOL Failure frame when the port link 

comes up, and any client on the port will be disallowed network access.   

 

Port-based 802.1X 

In the 802.1X-world, the user is called the supplicant, the switch is the 

authenticator, and the RADIUS server is the authentication server. The 

authenticator acts as the man-in-the-middle, forwarding requests and responses 

between the supplicant and the authentication server. Frames sent between the 

supplicant and the switch are special 802.1X frames, known as EAPOL (EAP 

Over LANs) frames. EAPOL frames encapsulate EAP PDUs (RFC3748). Frames 

sent between the switch and the RADIUS server are RADIUS packets. RADIUS 

packets also encapsulate EAP PDUs together with other attributes like the 

 

225 

 

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов