Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 232

Страница: 232 / 557

User’s Manual of WGSD-10020 Series

4.11.4 Network Access Overview

This page provides an overview of the current NAS port states for the selected switch. The Network Access Overview screen in

Figure 4-11-5

appears.

Figure 4-11-5

Network Access Server Switch Status page screenshot

The page includes the following fields:

Object

Description



Port

The switch port number. Click to navigate to detailed NAS statistics for this port.



Admin State

The port's current administrative state. Refer to NAS Admin State for a

description of possible values.



Port State

The current state of the port. Refer to NAS Port State for a description of the

individual states.



Last Source

The source MAC address carried in the most recently received EAPOL frame for

EAPOL-based authentication, and the most recently received frame from a new

client for MAC-based authentication.



Last ID

The user name (supplicant identity) carried in the most recently received

Response Identity EAPOL frame for EAPOL-based authentication, and the

source MAC address from the most recently received frame from a new client for

MAC-based authentication.



QoS Class

QoS Class assigned to the port by the RADIUS server if enabled.



Port VLAN ID

The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID

is not overridden by NAS.

If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)" is

appended to the VLAN ID. Read more about RADIUS-assigned VLANs here.

If the port is moved to the Guest VLAN, "(Guest)" is appended to the VLAN ID.

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 232 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: