Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 291

Страница: 291 / 557

User’s Manual of WGSD-10020 Series

Buttons

: click to add new policy.

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

4.14.4 LLDP-MED Neighbor

This page provides a status overview for all LLDP-MED neighbors. The displayed table contains a row for each port on which an

LLDP neighbor is detected. The LLDP-MED Neighbor Information screen in

Figure 4-14-3

appears. The columns hold the

following information:

Figure 4-14-3

LLDP-MED Neighbor Information page screenshot

The page includes the following fields:

Fast start repeat count

Object

Description



Port

The port on which the LLDP frame was received.



Device Type

LLDP-MED Devices are comprised of two primary Device Types: Network

Connectivity Devices and Endpoint Devices.

LLDP-MED Network Connectivity Device Definition

LLDP-MED Network Connectivity Devices, as defined in TIA-1057, provide

access to the IEEE 802 based LAN infrastructure for LLDP-MED Endpoint

Devices. An LLDP-MED Network Connectivity Device is a LAN access device

based on any of the following technologies:

1. LAN Switch/Router

2. IEEE 802.1 Bridge

3. IEEE 802.3 Repeater (included for historical reasons)

291

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 291 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: