Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 237

Страница: 237 / 557

User’s Manual of WGSD-10020 Series

packets sent from the switch

towards the backend server

for a given port (left-most

table) or client (right-most

table). Possible

retransmissions are not

counted.

Information about the last supplicant/client that attempted to authenticate. This

information is available for the following administrative states:

Port-based 802.1X

Single 802.1X

Multi 802.1X

MAC-based Auth

Name

IEEE Name

Description

MAC

Address

dot1xAuthLastEapolF

rameSource

The MAC address of the last supplicant/client.

VLAN ID

The VLAN ID on which the last frame from the

last supplicant/client was received.

Version

dot1xAuthLastEapolF

rameVersion

802.1X-based

The protocol version number carried in the most

recently received EAPOL frame.

MAC-based

Not applicable.



Last Supplicant/Client

Info

Identity

802.1X-based

The user name (supplicant identity) carried in the

most recently received Response Identity

EAPOL frame.

MAC-based

Not applicable.

Selected Counters

Object

Description



Selected Counters

The Selected Counters table is visible when the port is one of the following

administrative states:

Multi 802.1X

237

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 237 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: