Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 49

Страница: 49 / 557

User’s Manual of WGSD-10020 Series

4.2.1 System Information

The System Info page provides information for the current device information. System Info page helps a switch administrator to

identify the hardware MAC address, software version and system uptime. The screen in

Figure 4-2-1

appears.

Figure 4-2-1

System Information page screenshot

The page includes the following fields:

Object

Description



Contact

The system contact configured in Configuration | System | Information | System Contact.



Name

The system name configured in Configuration | System | Information | System Name.



Location

The system location configured in Configuration | System | Information | System

Location.



MAC Address

The MAC Address of this switch.



System Date

The current (GMT) system time and date. The system time is obtained through the

configured SNTP Server, if any.



System Uptime

The period of time the device has been operational.



Software Version

The software version of the switch.



Software Date

The date when the switch software was produced.

Buttons

Auto-refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

: Click to refresh the page; any changes made locally will be undone.

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 49 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: