Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 278

Страница: 278 / 557

User’s Manual of WGSD-10020 Series

Buttons

: Click to add a new entry.

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

4.13.2 MAC Address Table Status

Dynamic MAC Table

Entries in the MAC Table are shown on this page. The MAC Table contains up to

8192

entries, and is sorted first by VLAN ID,

then by MAC address. The MAC Address Table screen in

Figure 4-13-2

appears.

Figure 4-13-2

MAC Address Table Status

Navigating the MAC Table

Each page shows up to 999 entries from the MAC table, default being 20, selected through the "

entries per page"

input

field. When first visited, the web page will show the first 20 entries from the beginning of the MAC Table. The first displayed

will be the one with the lowest VLAN ID and the lowest MAC address found in the MAC Table.

The "

Start from MAC address

" and "

VLAN

" input fields allow the user to select the starting point in the MAC Table.

Clicking the “

Refresh

” button will update the displayed table starting from that or the closest next MAC Table match.

In addition, the two input fields will - upon a “

Refresh

” button click - assume the value of the first displayed entry, allowing

for continuous refresh with the same start address.

The “

” will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for the next lookup. When the

end is reached the text "no more entries" is shown in the displayed table. Use the “

|<<

” button to start over.

The page includes the following fields:

278

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 278 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: