Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 161

Страница: 161 / 557

User’s Manual of WGSD-10020 Series

Figure 4-8-7

IGMP Snooping Port Group Filtering Configuration page screenshot

The page includes the following fields:

Object

Description



Delete

Check to delete the entry. It will be deleted during the next save.



Port

The logical port for the settings.



Filtering Group

The IP Multicast Group that will be filtered.

Buttons

: Click to add a new entry to the Group Filtering table.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.8.5 IGMP Snooping Status

This page provides IGMP Snooping status. The IGMP Snooping Status screen in

Figure 4-8-8

appears.

161

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 161 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: