manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 50 / 557

Поделиться
Скачать
Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 50

User’s Manual of WGSD-10020 Series 

 

4.2.2 IP Configuration 

The IP Configuration includes the IP Address, Subnet Mask and Gateway. The Configured column is used to view or change the 

IP configuration. Fill up the IP Address, Subnet Mask and Gateway for the device. The screen in

 Figure 4-2-2

 appears. 

 

Figure 4-2-2

 IP Configuration page screenshot 

 

The Current column is used to show the active IP configuration. 

Object 

Description 

 

DHCP Client

 

Enable the DHCP client by checking this box. If DHCP fails and the configured IP 

address is zero, DHCP will retry. If DHCP fails and the configured IP address is 

non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client 

will announce the configured System Name as hostname to provide DNS lookup. 

 

IP Address

 

Provide the IP address of this switch in dotted decimal notation. 

 

IP Mask

 

Provide the IP mask of this switch dotted decimal notation. 

 

IP Router

 

Provide the IP address of the router in dotted decimal notation. 

 

VLAN ID 

Provide the managed VLAN ID. The allowed range is 

1

 through 

4095

. 

 

DNS Server 

Provide the IP address of the DNS Server in dotted decimal notation. 

 

DNS Proxy 

When DNS proxy is enabled, DUT will relay DNS requests to the current configured 

DNS server on DUT, and reply as a DNS resolver to the client device on the network. 

 

Buttons 

: Click to save changes. 

 

50 

 

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов