Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 102

Страница: 102 / 557

User’s Manual of WGSD-10020 Series

Figure 4-5-3

Aggregation Group Configuration page screenshot

The page includes the following fields:

Object

Description



Group ID

Indicates the group ID for the settings contained in the same row. Group ID

"Normal" indicates there is no aggregation. Only one group ID is valid per port.



Port Members

Each switch port is listed for each group ID. Select a radio button to include a port

in an aggregation, or clear the radio button to remove the port from the

aggregation. By default, no ports belong to any aggregation group.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

102

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 102 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: