Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 62

Страница: 62 / 557

User’s Manual of WGSD-10020 Series

Circuit ID

missing.



Receive Missing

Remote ID

The packets number that received packets which Remote ID option was missing.



Receive Bad Circuit ID

The packets number that the Circuit ID option did not match known circuit ID.



Receive Bad Remote

The packets number that the Remote ID option did not match known Remote ID.

Client Statistics

Object

Description



Transmit to Client

The packets number that relayed packets from server to client.



Transmit Error

The packets number that error sending packets to servers.



Receive form Client

The packets number that received packets from server.



Receive Agent Option

The packets number that received packets with relay agent information option.



Replace Agent Option

The packets number that replaced received packets with relay agent information

option.



Keep Agent Optin

The packets number that keepped received packets with relay agent information

option.



Drop Agent Option

The packets number that dropped received packets with relay agent information

option.

Buttons

Auto-refresh

: Check this box to enable an automatic refresh of the page at regular intervals.

: Click to refresh the page; any changes made locally will be undone.

: Clear all statistics.

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 62 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: