manualshive.com logo in svg

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 289 / 557

Поделиться
Скачать
Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 289

User’s Manual of WGSD-10020 Series 

 

4. Video Conferencing 

5. Streaming Video 

6. Control / Signaling (conditionally support a separate network policy for the media types above) 

 

A large network may support multiple VoIP policies across the entire organization, and different policies per application type. 

LLDP-MED allows multiple policies to be advertised per port, each corresponding to a different application type. Different ports 

on the same Network Connectivity Device may advertise different sets of policies, based on the authenticated user identity or 

port configuration. 

It should be noted that LLDP-MED is not intended to run on links other than between Network Connectivity Devices and 

Endpoints, and therefore does not need to advertise the multitude of network policies that frequently run on an aggregated link 

interior to the LAN. 

Object 

Description 

 

Delete 

Check to delete the policy. It will be deleted during the next save. 

 

Policy ID 

ID for the policy. This is auto generated and shall be used when selecting the   

polices that shall be mapped to the specific ports. 

 

Application Type 

Intended use of the application types: 

Voice

 - for use by dedicated IP Telephony handsets and other similar appliances 

supporting interactive voice services. These devices are typically deployed on a 

separate VLAN for ease of deployment and enhanced security by isolation from 

data applications. 

Voice Signaling (conditional)

 - for use in network topologies that require a 

different policy for the voice signaling than for the voice media. This application 

type should not be advertised if all the same network policies apply as those 

advertised in the Voice application policy. 

Guest Voice

 - support a separate 'limited feature-set' voice service for guest 

users and visitors with their own IP Telephony handsets and other similar 

appliances supporting interactive voice services. 

Guest Voice Signaling (conditional)

 - for use in network topologies that require 

a different policy for the guest voice signaling than for the guest voice media. 

This application type should not be advertised if all the same network policies 

apply as those advertised in the Guest Voice application policy. 

Softphone Voice

 - for use by softphone applications on typical data centric 

devices, such as PCs or laptops. This class of endpoints frequently does not 

support multiple VLANs, if at all, and are typically configured to use an 'untagged’ 

VLAN or a single 'tagged’ data specific VLAN. When a network policy is defined 

for use with an 'untagged’ VLAN (see Tagged flag below), then the L2 priority 

field is ignored and only the DSCP value has relevance. 

Video Conferencing 

 

289 

 

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов