Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 59

Страница: 59 / 557

User’s Manual of WGSD-10020 Series

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

Figure 4-2-10

UPnP

devices shows on Windows My Network Places

4.2.8 DHCP Relay

Configure DHCP Relay on this page.

DHCP Relay

is used to forward and to transfer DHCP messages between the clients and

the server when they are not on the same subnet domain.

The

DHCP option 82

enables a DHCP relay agent to insert specific information into a DHCP request packets when forwarding

client DHCP packets to a DHCP server and remove the specific information from a DHCP reply packets when forwarding server

DHCP packets to a DHCP client. The DHCP server can use this information to implement IP address or other assignment

policies. Specifically the option works by setting two sub-options:



Circuit ID (option 1)



Remote ID (option2).

The Circuit ID sub-option is supposed to include information specific to which circuit the request came in on.

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 59 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: