![background image](http://html.mh-extra.com/html/planet-networking-and-communication/wgsd-10020/wgsd-10020_user-manual_1563979127.webp)
User’s Manual of WGSD-10020 Series
Setup steps
1. Create
VLAN
Group
Set VLAN Group 1 = Default-VLAN with VID (VLAN ID) =1
Add two VLANs – VLAN 2 and VLAN 3
VLAN Group 2 with VID=
2
VLAN Group 3 with VID=
3
2. Assign VLAN Member :
VLAN 2 : Port-1,Port-2 and Port-3
VLAN 3 : Port-4, Port-5 and Port-6
VLAN 1 : All other ports – Port-7~Port-24
About the VLAN ports connect to the hosts, please refer to 4.6.10.1 examples. The following steps will focus on the VLAN
Trunk
port
configuration.
1. Specify
Port-8
to be the 802.1Q VLAN
Trunk port
.
2. Assign
Port-8
to both
VLAN 2
and
VLAN 3
at the VLAN Member configuration page.
3. Define
a
VLAN 1
as a
“Public Area”
that overlapping with both
VLAN 2 members
and
VLAN 3 members
.
4. Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add
Port-8
to
be
VLAN 2
and
VLAN 3
member port. The screen in
Figure 4-6-12
appears.
127
Содержание WGSD-10020
