Planet Networking & Communication WGSD-10020 Скачать руководство пользователя страница 156

Страница: 156 / 557

User’s Manual of WGSD-10020 Series

IGMP Versions 1 and 2

Multicast groups allow members to join or leave at any time. IGMP provides the method for members and multicast routers to

communicate when joining or leaving a multicast group.

IGMP version 1 is defined in RFC 1112. It has a fixed packet size and no optional data.

The format of an IGMP packet is shown below:

IGMP Message Format

Octets

8 16

Type Response

Time

Checksum

Group Address (all zeros if this is a query)

The IGMP Type codes are shown below:

Type Meaning

0x11

Membership Query (if Group Address is 0.0.0.0)

0x11

Specific Group Membership Query (if Group Address is

Present)

0x16

Membership Report (version 2)

0x17

Leave a Group (version 2)

0x12

Membership Report (version 1)

IGMP packets enable multicast routers to keep track of the membership of multicast groups, on their respective sub networks.

The following outlines what is communicated between a multicast router and a multicast group member using IGMP.

A host sends an IGMP

“report”

to join a group

A host will never send a report when it wants to leave a group (for version 1).

A host will send a

“leave”

report when it wants to leave a group (for version 2).

Multicast routers send IGMP queries (to the all-hosts group address: 224.0.0.1) periodically to see whether any group members

exist on their sub networks. If there is no response from a particular group, the router assumes that there are no group members

on the network.

The Time-to-Live (TTL) field of query messages is set to 1 so that the queries will not be forwarded to other sub networks.

IGMP version 2 introduces some enhancements such as a method to elect a multicast queried for each LAN, an explicit leave

156

Содержание WGSD-10020














































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WGSD-10020

Отзывы:

Planet Networking & Communication WGSD-10020, Руководство пользователя, Страница: 156 / 557

Результаты поиска

Содержание WGSD-10020

Отзывы: