Pioneer SC-09TX - Elite AV Network Receiver, Руководство по эксплуатации

Страница: 42 / 160

Using the tuner
06
42
En
Chapter 6:
Using the tuner
Listening to the radio
The following steps show you how to tune in to FM and
AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the
frequency of the station you want, see
Tuning directly to a
station
below. Once you are tuned to a station you can
memorize the frequency for recall later—see
Saving
station presets
on page 43 for more on how to do this.
1 Press the TUNER button to select the tuner.
2 Use the BAND button to change the band (FM or
AM), if necessary.
Each press switches the band between FM and AM.
3 Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently selected band,
press and hold
TUNE
/
for about a second. The
receiver will start searching for the next station,
stopping when it has found one. Repeat to search for
other stations.
Manual tuning
To change the frequency one step at a time, press
TUNE
/
.
High speed tuning
Press and hold TUNE
/
for high speed tuning.
Release the button at the frequency you want.
Improving FM stereo sound
If the TUNED or STEREO indicators don’t light when
tuning to an FM station because the signal is weak, press
the
MPX
button to switch the receiver into mono
reception mode. This should improve the sound quality
and allow you to enjoy the broadcast.
Using the noise cut mode
The four noise cut modes can be used when receiving
AM broadcasts. Press the
MPX button to select the noise
cut mode (1 to 4).
Using Neural THX
This feature uses Neural Surround™, THX
®
technologies
to achieve optimal surround sound from FM radio.
• While listening to FM radio, press AUTO/DIRECT for
Neural THX listening.
See
About Neural - THX Surround
on page 136 for more on
this.
The Neural THX mode can be selected also with the
STANDARD button.
Tuning directly to a station
Sometimes, you’ll already know the frequency of the
station you want to listen to. In this case, you can simply
enter the frequency directly using the number buttons on
the remote control.
1 Press the TUNER button to select the tuner.
2 Use the BAND button to change the band (FM or
AM), if necessary.
Each press switches the band between FM and AM.
3 Press D.ACCESS (Direct Access).
4 Use the number buttons to enter the frequency of
the radio station.
For example, to tune to 106.00 (FM), press 1 , 0 , 6 , 0 , 0 .
If you make a mistake halfway through, press D.ACCESS
twice to cancel the frequency and start over.
DVD
RECEIVER SOURCE
MAIN
MULTI
OPERATION
ZONE2 3
DVR1
GALLERY
HOME MEDIA
INPUT SELECT
CD
TUNER iPod HDMI PHONO
CD-R
DVR2 VIDEO1 VIDEO2
BD TV SAT
SACD
XM SIRIUS
TUNER
AUDIO
PARAMETER
TOP MENU
BAND
CATEGORY
STATUS
THX MPX MEMORY
CH LEVEL
MENU
T.EDIT
VIDEO
PARAMETER
RETURN
SETUP
TUNE
TUNE
ST ST
STEREO/
F.S.SURR
AUTO/
DIRECT
STANDARD ADV SURR
Enter
TUNE
TUNE
ENTER
BAND
MPX
SIGNAL SEL SLEEP AUDIO
iPod CTRL
DIMMER
SR+
CLR
SBch PHASE
A.ATT GENRE HDMI OUT
D.ACCESS
ENTER
MCACC CLASS
DISP
CH
D.ACCESS
SC_09TX.book Page 42 Monday, November 26, 2007 10:32 PM