Controlling the rest of your system
13
113
En
Chapter 13:
Controlling the rest of your system
Setting the remote to control other
components
Most components can be assigned to one of the input
source buttons (such as
DVD
or
CD
) using the
component’s manufacturer preset code stored in the
remote.
However, there are cases where only certain functions
may be controllable after assigning the proper preset
code, or the codes for the manufacturer in the remote
control will not work for the model that you are using.
If you can’t find a preset code that matches the
component you want to control, you can still teach the
remote individual commands from another remote
control (see
Programming signals from other remote
controls
below).
Note
• You can cancel or exit any of the steps by pressing
MULTI OPERATION
. To go back a step, press
RETURN
.
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
1
While pressing the MULTI OPERATION button,
press SETUP.
The remote LCD display shows
SETUP
.
2
Use
/
to select PRESET, then press ENTER.
3
Press the input source button for the component
you want to control, then press ENTER.
The LCD on the remote displays the component you want
to control (for example
DVD
or
TV
).
1
4
Use
/
to select the first letter of the brand name
of your component, then press ENTER.
This should be the manufacturer’s name (for example,
P
for Pioneer).
5
Use
/
to select the manufacturer’s name from
the list, then press ENTER.
6
Use
/
to select the proper code from the list,
then try using this remote with your component.
The code should start with the component type (for
example,
DVD 020
). If there is more than one, start with
the first one.
2
To try out the remote control, switch the component on or
off (into standby) by pressing
SOURCE
. If it doesn’t
seem to work, select the next code from the list (if there
is one).
• If you can’t find or properly enter a preset code, you
can still teach the remote individual commands from
another remote control (see
Programming signals
from other remote controls
below).
7
If your component is controlled successfully, press
ENTER to confirm.
The remote LCD display shows
OK
.
Programming signals from other
remote controls
If the preset code for your component is not available, or
the available preset codes do not operate correctly, you
can program signals from the remote control of another
component. This can also be used to program additional
operations (buttons not covered in the presets) after
assigning a preset code.
3
1
While pressing the MULTI OPERATION button,
press SETUP.
The remote LCD display shows
SETUP
.
2
Use
/
to select LEARNING, then press ENTER.
The LCD on the remote prompts you for the component
you want to control (for example
DVD
or
TV
).
Note
1 You can’t assign the
TUNER
,
iPod
,
HOME MEDIA GALLERY
,
XM
or
SIRIUS
buttons.
DVD
RECEIVER
SOURCE
MAIN
MULTI
OPERATION
ZONE2
3
DVR1
GALLERY
HOME MEDIA
INPUT SELECT
CD
TUNER
iPod
HDMI
PHONO
CD-R
DVR2
VIDEO1
VIDEO2
BD
TV
SAT
SACD
XM
SIRIUS
DVD
DVR1
GALLERY
HOME MEDIA
INPUT SELECT
CD
TUNER
iPod
HDMI
PHONO
CD-R
DVR2
VIDEO1
VIDEO2
BD
TV
SAT
SACD
XM
SIRIUS
MULTI
OPERATION
AUDIO
PARAMETER
TOP MENU
BAND
CATEGORY
STATUS
THX
MPX
MEMORY
CH LEVEL
MENU
T.EDIT
VIDEO
PARAMETER
RETURN
SETUP
INPUT
MUTE
TUNE
TUNE
ST
ST
MUTE
TV CONTROL
Enter
ENTER
SETUP
2 • When using a Pioneer HDD recorder, please select
PIONEER DVR
487
,
488
,
489
or
493
.
• When using a Pioneer plasma display released prior to summer 2005, please select preset codes
637
or
660
.
3 The remote can store about 200 preset codes (this has been tested with codes of Pioneer format only).
SC_09TX.book Page 113 Monday, November 26, 2007 10:32 PM
Содержание SC-09TX - Elite AV Network Receiver
Страница 1: ...uctions REC ...
Страница 160: ......
