Pioneer SC-09TX - Elite AV Network Receiver, Руководство по эксплуатации

Страница: 154 / 160

Additional information
14
154
En
Cautions on Handing
Liquid crystal screen
• There may be small black dots or brightly shining
spots (bright points) on the liquid crystal screen. This
is a particularity of liquid crystal screens, and is not a
malfunction.
• When using in cold places, the screen may be dark
for a while after the power is turned on. The
brightness will return to normal after a while.
• If the liquid crystal display is exposed to direct
sunlight, the sunlight will reflect off of it, making the
display hard to see. Block the direct sunlight.
Liquid crystal backlight
• The backlight will reach the end of its service life after
approximately 10 000 hours. (The service life may be
shortened if used continuously at high temperatures
on a rack or when used continuously in low
temperatures. When using on a rack, be sure to allow
for heat dissipation.)
Cleaning the shiny surfaces of the panel and
the liquid crystal display window
Use the included wiping cloth (dry) to gently wipe any dirt
off the shiny surfaces of this receiver’s panel and the
liquid crystal display window.
Notes on handling the included wiping cloth
• Using the wiping cloth with dust on it may scratch
this receiver’s surface.
• If the wiping cloth is dirty, clean it as described
below. Dilute neutral detergent in about 100 parts
water, wash the cloth by rubbing it against itself in
this solution, rinse it carefully to remove any traces of
detergent, then let it dry.
• If the wiping cloth has been lost or is extremely dirty,
order a new one either from your nearest sales outlet
or directly from the Pioneer Parts Order Center. You
can also use a commercially available lens cleaning
cloth instead.
SC-09TX
MASTER
VOLUME
STANDBY/ON
INPUT
SELECTOR
R1 R2 R3 R4 R5
ACTIVE MONITOR
L5 L4 L3 L2 L1
Liquid crystal
display window
Shiny surfaces
of panel
SC_09TX.book Page 154 Monday, November 26, 2007 10:32 PM