“
External storage device (USB, SD)
”
The SD memory card, SDHC memory card,
microSD card, microSDHC card and USB
memory device are collectively referred to as
the
“
external storage device (USB, SD)
”
. If it in-
dicates the USB memory only, it is referred to
as the
“
USB storage device
”
.
“
SD memory card
”
The SD memory card, SDHC memory card,
microSD card and microSDHC card are col-
lectively referred to as the
“
SD memory card
”
.
“
iPod
”
In this manual, iPod and iPhone will be re-
ferred to as
“
iPod
”
.
Notes on internal memory
Before removing the vehicle
battery
If the battery is disconnected or discharged,
the memory will be erased and must be repro-
grammed.
p
Some of the settings and recorded con-
tents will not be reset.
Data subject to erasure
The information is erased by disconnecting
the yellow lead from the battery (or removing
the battery itself).
p
Some of the settings and recorded con-
tents will not be reset.
Resetting the microprocessor
CAUTION
Pressing the
RESET
button resets settings and re-
corded contents to the factory settings.
p
Do not perform this operation when a device
is connected to this product.
p
Some of the settings and recorded contents
will not be reset.
The microprocessor must be reset under the
following conditions:
!
Prior to using this product for the first time
after installation.
!
If this product fails to operate properly.
!
If there appears to be problems with the op-
eration of the system.
!
If your vehicle position is shown on the
map with a significant positioning error.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip
or other pointed implement.
Settings and recorded contents are reset to
the factory settings.
8000NEX 7000NEX
1
6000NEX 5000NEX X8610BS
1
1
RESET
button
En
11
Chapter
01
In
tr
o
d
u
c
ti
o
n
Introduction