OPERATING AND INSTALLATION INSTRUCTIONS LBE 250 / LBE 500
PAGE 40
5.
During this work step, pay attention to leaking water!
a.) To disconnect the inlet hose from the hose connec-
tor,, push the click system backwards. Then the hose
can be removed (LBE 250 1 x / LBE 500 2 x).
b.) Then remove the cover, pull out the reverse osmo-
sis housing and the osmosis membrane(s) from the
housing.
c) Then exchange the osmosis membrane(s).
6. Reassemble
the device.
7.
Plug in the
mains cable.
After plug-in, the water tank is
drained automatically.
.
8.
In case of
scale deposits
in the device and on the rotor,
the hardness of water must be set 1 to 2 levels higherin
the Expert menu.
9. The maintenance is completed.
Reverse osmosis membrane
inlet hose
US
ER
G
ENER
A
L
S
PE
CI
A
LI
S
T PER
S
O
NNEL
