PERCo CT/L-14, Руководство по сборке и эксплуатации

Страница: 46 / 58

CT/L-14 Controller Web-Interface
45
3. In the opened window make the necessary changes of the settings:
•
Number parameter sets the number of the added reader;
•
Communication interface parameter sets the interface or reader type;
•
Connection port parameter sets the port of the interface or the address on the bus (RS-
485 / Wiegand);
•
Operating device parameter sets the number of the OD to which the reader is attached;
•
Direction parameter sets the direction of the OD to which the reader is attached;
“Morpho” fingerprint scanner:
•
Sensor position parameter sets the position in which the reader will identify and verify the
finger, taking into account its possible rotation;
•
Possibility of an unauthorized access parameter sets the probability of unauthorized
access (error of the first kind), expressed as a percentage of the number of access of
unauthorized persons by the system;
•
Fingerprint format parameter sets fingerprint formats.
Trassir
•
SSL parameter sets the exchange coding initiation with Trassir server.
•
Address parameter sets line with Trassir server IP-address.
•
Port parameter sets Trassir server port number.
•
Password parameter sets Trassir server authorization password.
•
Movement line parameter sets the number of the movement line for this OD direction;
•
Channel parameter sets the line with Trassir server channel ID.
4. To add the reader with the assigned number and transfer the changed parameters to the
controller, click the Save button. The Reader window will be closed.
5. To exit the window Reader without saving changes, click the Cancel button. Also, it is possible
to close the window using the Close button .
6. In order to delete the reader from the list, click the title bar in the page working area, the
Reader
window will be opened . Press the Delete button . The Reader window will be closed; the
chosen reader will be deleted.
4.2.4 Internal responses
To set internal responses of the controller:
1. Click consistently Configuration

Edit

Internal responses in the Web-interface
menu. The page with working area will be opened:
2. To add the new response, click the Add button, to change the settings of internal response
or delete it, click the title bar in the page working area. The Internal response window will
be opened: