PERCo CT/L-14, Руководство по сборке и эксплуатации

Страница: 45 / 58

User Manual
44
•
Function parameter sets the contact function;
•
Resource parameter sets the contact resource;
•
Direction parameter sets the direction of a reader OD ;
•
Normal contact parameter sets the normal contact status – open or closed for inputs,
powered or not powered for outputs;
•
Anti-Bounce parameter sets the contact Anti-Bounce time (for inputs).
4. Click the Save button. The Physical contact window will be closed, the changed settings of
inputs (outputs) will be passed to the controller.
5. To exit the Physical contact window without saving changes, click the Cancel button. Also, it
is possible to close the window using the Close button .
6. To remove input or output from the list, click the title bar in the page working area, the
Physical contact window will be opened. Click the Delete button. The Physical contact
window will be closed; the selected physical contact will be deleted.
4.2.3 Readers
In all controller configurations to each direction of every OD one reader or one infrared-panel
(hereafter – reader ) is assigned. If necessary, it is possible to add into the configuration optional
readers for the passage directions through the OD. For one direction two or three readers working
in parallel can be installed. It can be useful, for example, when connecting a card capture reader,
organizing the vehicle checkpoint to install the readers at different levels (for cars and trucks), etc.
Note:
When adding optional readers, they are configured similarly to card capture readers
attached to the same OD directions. In this regard, added readers are not shown in network
and local software of
PERCo-Web
system.
To configure the reader settings:
1. Click consistently
Configuration

Edit

Readers in the Web-interface menu. The page with
working area will be opened:
2. To add a reader to the list, click the Add button. To change the parameters or delete the reader,
click the title bar in the page working area of the reader. The Reader window will be opened: