PERCo CT/L-14, Руководство по сборке и эксплуатации

Страница: 33 / 58

Operation Manual
32
Figure 16. Connection layout for two turnstiles with IC-05 card capture readers
The card capture reader is designed to operate as a device for reading, capturing and keeping
Proximity
cards issued to visitors and meant for withdrawal at exit.
In PERCo-Web system the CT/L-14 controller operates with the IC05 card capture reader, built-in
card capture readers of the
PERCo
turnstiles, connection of third-party card capture readers is
possible. The procedure of configuring the controller and the IC05 card capture reader is described
in
the Administrator’s Guide
of these systems and also in the
IC05
Operation Manual.
An example of connection of the PERCo card capture readers is shown in Fig. 15. Any available
inputs and outputs are used in the current controller configuration.
The controller controls the card capture reader by sending the “
Capture card
” input signal to the
card capture reader board. One of the additional outputs of the controller, which connects the
“
Capture card”
input, should be configured in software so that upon presentation of the card to the
proper card reader, the output is activated (input type – “EVD confirmation input”).