manualshive.com logo in svg

Paso PA8506-V, Инструкция по эксплуатации, Страница: 62 / 68

Поделиться
Скачать
Paso PA8506-V Скачать руководство пользователя страница 62

58

PA8506-V 

|

 VES Compact System

PA8500-VES | Voice Evacuation System 

System Manual | 2014

UK

For.zones.with.a.current.ALERT.message.activated.manually,.it.is.possible.to.activate.the.Evacuation.message.by.pressing.the.EVAC.key.

directly.

For.zones.with.a.current.EVAC.message.activated.manually,.it.is.only.possible.to.send.out.an.Alert.message,.which.has.a.lower.priority,.after.

RESETTING.the.zone,.as.indicated.under.point.8.9.4.

•  Exiting manual management of an emergency

Upon.completion.of.the.procedure.for.managing.the.Manual.Emergency,.press.the.red.EMERGENCY.key,.which.will.extinguish,.and:

. -.

if no activation from external peripheral units connected to the “Control Input” contacts are activated

,.the.system.will.return.automatically.to.

the.idle.condition,.displaying.the.MUSIC.menu..The.ALARM.LED.will.remain.extinguished.to.indicate.that.the.VOICE.ALARM.is.not.active.

. -.

If  there  are  any  current  activations  from  external  peripheral  units  connected  to  a  “Control  Input”  contact

,. the. system. will. return. to. the.

Automatic.Emergency.condition,.displaying.the.INPUT.ALARM.STATUS.menu..Broadcasting.of.the.emergency.messages.will.resume,.on.

the.basis.of.the.programming.of.the.activated.inputs.and.with.–.if.appropriate.–.the.ALARM.LED.illuminated.to.indicate.an.active.VOICE.

ALARM.

8.9.4   Manual resetting of the alarms

It.is.possible.to.carry.out.general.or.partial.RESETTING.of.the.alarm.messages,.based.on.whether.the.zones.are.selected.or.whether.they.have.

alarms.in.progress..

• GENErAL resetting of current messages

On.accessing.the.Emergency.panel.for.the.first.time,.the.zones.will.already.all.be.selected..As.an.alternative,.it.is.possible.to.place.the.zones.in.

a.condition.of.general.selection,.as.indicated.under.point.8.9.5.

. .

•..Press.the.RESET.key.

The.message.being.played.out.to.the.zones.will.be.reset,.the.status.labels.of.the.zones.will.become.empty.and.the.zones.will.all.be.in.a.selected.

condition..The.ALARM.LED.will.extinguish.to.indicate.that.the.“Alarm.Condition”.is.de-activated.

• PArTIAL resetting of the current messages

Partial.resetting.is.permitted.only.for.zones.with.messages.playing.out.that.have.been.activated.manually.

. .

•..Select.the.zones.to.be.reset

. .

•..Press.the.RESET.key

In.the.zones.that.have.been.reset,.the.message.that.was.activated.manually.will.be.de-activated.and,.if.appropriate,.the.message.that.was.playing.

out.due.to.an.earlier.automatic.activation.will.be.resumed...The.other.zones,.that.have.not.been.reset,.will.continue.to.broadcast.the.current.

message..The.system.will.switch.the.zones.to.general.selection.

Note

:.If.the.RESET.is.carried.out.without.selecting.the.zones.first,.the.messages.to.all.the.zones.will.be.reset.and,.for.about.10.seconds,.only.

the.zones.for.which.messages.had.been.activated.manually.will.continue.to.be.selected..Then.the.general.selection.of.all.the.zones.will.be.

restored

Note

:.Following.broadcasting.to.all.zones.of.an.alarm.message.or.partial.RESETTING.of.some.zones,.the.labels.may.all.“STOP.FLASHING”..

The.condition.of.the.zones.corresponds,.however,.to.a.state.of.general.selection,.equivalent.to.indicating.the.zones.as.“ALL.FLASHING”..

Management.of.a.Manual.Emergency.does.not.include,.therefore,.a.condition.of.“All.zones.not.selected”.

8.9.5   Selecting/unselecting the emergency areas

Press.the.numerical.keys.of.the.zones.in.question.in.order.to.select/unselect.a.zone.or.group.of.zones.as.required,.according.to.the.following.

indications:.
•.Zone.label.flashing.=.zone.selected
•.Zone.label.not.flashing.=.zone.not.selected
•.Zone.labels.all.flashing.=.all.zones.selected
•.NO.zone.labels.flashing.=.all.zones.selected.(see.note).
•.The.zones.with.status.labels.indicating.DIS.cannot.be.selected.
The.condition.of.general.selection.of.all.the.zones.is.also.indicated.by.the.text.on.the.display,.reading:

. “PTT,.EVAC.or.ALERT.

for general call

,...”

while.during.the.stage.of.selection.of.a.group.of.zones.the.display.will.read:

. “PTT,.EVAC.or.ALERT.

for zone(s) call

...”

Содержание PA8506-V





































































Отзывы:

Нет отзывов