Paso PA8506-V Скачать руководство пользователя страница 61

Страница: 61 / 68

System Manual | 2014

PA8500-VES | Voice Evacuation System

PA8506-V

VES Compact System

If.necessary,.repeat.point.

).to.diversify.the.messages.to.the.various.different.zones..

The.EVAC.message.has.priority.over.the.ALERT.message..

The.Emergency.Microphone.has.priority.over.both.pre-recorded.messages.

Access.the.external.peripheral.unit.

connected.to.the.CONTROL.INPUT.

contacts.

De-activate.all.the.contacts.applied.to.

the.CONTROL.INPUTS.

The.system.will.continue.to.broadcast.any.manually.

activated.messages..

4) End of the Automatic Emergency function, if any, from the input contacts

Exit.from.Manual.Emergency

Press.the.

Emergency

.key.once

The.system.will.return.to.the.MUSIC.panel.

End of the Manual Emergency and return to a Quiescent Condition

8.9.3 Access to the system for handling a Manual Emergency

•. Press.the.red.EMERGENCY.key..The.display.will.show.the.current.

status. of. each. zone. and. a. message. indicating. the. procedure. for.

accessing.the.Emergency.mode.or.the.Operator.mode.

•. Press.the.red.EMERGENCY.key.again.within.about.15.seconds.from.

the. first. time. (or. exit. by. pressing. ESC. to. return. to. the. Main. page.

menu)...

The.EMERGENCY.will.light.up.steadily.to.indicate.that.a.condition.of.

Manual.Emergency.has.been.activated.

• Operation during manual management of an emergency

Following.access,.the.display.will.show.the.status.of.the.zones,.indicating.–.if.appropriate.-.the.messages.currently.activated.automatically.via.the.

“Control.Inputs”..By.default,.when.first.accessed,.all.the.zones.have.already.been.selected.for.a.general.emergency..Any.disabled.zones.will.not.

be.available.(see.the.DISABLEMENT.section).

When.a.current.Manual.Emergency.is.in.progress,.if.no.General.Reset.of.the.alarms.is.carried.out,.any.new.activations.of.input.contacts.will.

be.carried.out.for.the.free.zones.on.the.basis.of.how.the.activated.contact.has.been.programmed.(see.section.8.6.1.Set>.CONTROL.INPUTS)..

Following.a.GENERAL.RESET.of.the.alarms,.any.re-activation.of.the.input.contacts.will.have.no.effect.on.the.zone.outputs.

When.the.system.is.working.correctly.with.the.double.channels,.the.display.will.show:

“PTT,.EVAC.or.ALERT.for.general.call,.ESC.muting.beep”.

In.the.event.of.failure.of.an.amplifier,.on.the.other.hand,.the.text.on.the.display.will.read:

“Only.one.channel.available.FAULT.CONDITION”

to.show.that.only.one.channel.is.operational.

In.any.case,.manual.resetting.of.the.beep.signalling.a.failure.is.always.available,.by.pressing.directly.the.ESC.key...For.further.information.

concerning.resetting.of.the.beep.see.point.8.5.1.1.

While.an.Emergency.message.is.being.broadcast,.it.is.possible,.if.required,.to.change.the.selection.of.zones,.as.indicated.under.2,.to.diversify.

broadcasting.of.the.Emergency.message,.sending.two.separate.messages.to.two.different.groups.of.zones.(operation.with.double.channel).

Any.current.messages.that.have.already.been.activated.automatically.via.an.external.peripheral.unit.have.a.lower.priority.than.the.message.

activated.manually,.and.it.is.therefore.possible.to.change.the.message.being.broadcast.by.activating.the.manual.function.

Содержание PA8506-V





































































Результаты поиска

Содержание PA8506-V

Отзывы:

Paso PA8506-V, Инструкция по эксплуатации, Страница: 61 / 68

Результаты поиска

Содержание PA8506-V

Отзывы: