manualshive.com logo in svg

Paso PA8506-V, Инструкция по эксплуатации, Страница: 28 / 68

Поделиться
Скачать
Paso PA8506-V Скачать руководство пользователя страница 28

24

PA8506-V 

|

 VES Compact System

PA8500-VES | Voice Evacuation System 

System Manual | 2014

UK

8.  USING THE SySTEM 

After.making.all.the.connections.in.accordance.with.the.chapters.on.Sizing.

and.Connections,.start.the.PA8506-V.by.moving.the.POWER.switch.(4).to.the.

ON.position..The.display.will.light.up.and.show.the.welcome.screen.(loading.

takes.about.30.seconds)..Once.loading.is.completed,.the.display.will.show.the.

panel.of.the.Music.menu,.from.which.it.is.possible.to.access.the.MAIN.page.

by.pressing.the.MENU.key..If.the.system.is.being.used.for.the.first.time,.or.

if.the.configuration.has.been.changed,.proceed.according.to.the.indications.

shown.in.the.section.

8.2 Initialising the system

..If.the.initialise.procedure.

is.complete,.see.the.instructions.of.the.following.sections:
•. For.normal.use.of.background.music.and.voice.announcements,.users.can.

use.just.MUSIC.and.AUDIO.SETTING.menu.

•. For. the. management. of. advanced. features. during. fault,. emergency. and.

configuration.condition,.see.the.following.menu.INSPECTION,.OPERATOR,.

and.EMERGENCY.CONFIGURATION.

•..To.reset.the.“beep”,.see.Section.INSPECTION.(Section.8.5.1.1)
•. To.send.emergency.messages.see.Section.EMERGENCY.(par..8.9).
•..To.manage.the.integrated.monitor.loudspeaker,.refer.to.the.information.in.

par..8.1.

The. functions. associated. with. levels. featuring.

restricted.access,.for.which.a.password.may.be.set,.

are.highlighted.by.this.symbol.

MENU

ESC

8.1  MONITOr PANEL 

This.panel.can.be.used.to.manage.the.loudspeaker.monitor.built.into.the.

front.panel.of.the.equipment..It.is.reached.directly.from.the.MAIN.page.by.

pressing.the.MENU.key.

Once.all.the.necessary.adjustments.have.been.made,.press.ESC.to.return.

to.the.MUSIC.panel.o.press.MENU.to.return.to.the.MAIN.page..

The.RESET,.ALERT,.EVAC,.OK.and.Zones.3.to.6.keys.are.not.active.

Loudspeaker volume control:

.

•. Hold.key.1.(VOL).down.and.turn.the.+/-.knob.to.adjust.the.volume,.within.a.range.of.±10.dB.as.compared.to.the.current.setting.for.

the.source.selected.

Selecting the signal to be sent to the monitoring loudspeaker:

.

•. Hold.key.

2

.(INPUT).down.and.turn.the.knob.to.select.the.input.from.among.the.following:

>.MIC1.

Microphone.source.connected.to.the

 IN 1

.input.

>.MIC2.

Microphone.or.line.source.connected.to.the

 IN 2

.input.

>.AUX.IN./.REMOTE.MUSIC. The.signal.provided.by.the.monitor,.with.reference.to.the.two.possible.inputs,.AUX.IN.or.REMOTE.MUSIC,..will.

be.either.the.current.signal.or.the.one.selected.earlier.in.the.MUSIC.management.screen.

>.VOX.

source.connected.to.the

 IN 3

.input.

>.USB.PLAYER./.ALERT.

If.the.signal.of.the.alert.message.(ALERT).is.present,.it.will.have.a.higher.priority.than.the.USB.input.signal.

>.CHIME./.EVAC.

If.the.signal.of.the.evacuation.message.(EVAC).is.present,.it.will.have.a.higher.priority.than.the.CHIME.signal.

>.VOICE.AMPLIFIER.

The.signal.produced.by.the.monitor.will.correspond.to.the.source.that.is.active.on.the.voice.or.emergency.

channels.(main.channel.with.a.high.priority).

>.MUSIC.AMPLIFIER.

The.signal.produced.by.the.monitor.will.correspond.to.the.current.source.active.on.the.music.or.emergency.

channels.(secondary.channel.with.low.priority).

>.NONE..

No.input.(monitoring.loudspeaker.off).

Note

:.Regardless.of.which.input.is.selected.and.of.the.volume.set,.in.the.event.that.the.system.goes.into.a.Fault.condition.the.loudspeaker.

monitor.will.produce.an.acoustic.signal.indicating.a.“current.failure”.(beep).
To.reset.the.beep,.access.the.“Manual.beep.reset”.function.(point.8.5.1.1).

8.1.1  Enabling the music input to the remote PA8506-V

In.a.12-zone.system,.with.two.PA8506-V.units.connected.to.one.another,.it.is.possible.to.enable.the.input.selected.for.the.music.source.of.the.

local.PA8506-V.so.that.the.sound.can.also.by.broadcast.by.the.remote.PA8506-V..
.

•. Press.key.

6

.(OUT).cyclically.to.choose.between.the.following.options:

.

. -.OUT.REMOTE.MUSIC:.ON.

The.input.of.the.local.PA8506-V.is.available.for.playing.out.to.the.remote.PA8506-V.

.

. -.OUT.REMOTE.MUSIC:.OFF.

The.input.of.the.local.PA8506-V.is.disabled.for.the.remote.PA8506-V.

Содержание PA8506-V





































































Отзывы:

Нет отзывов