Parker Coral Sea, Руководство пользователя

Страница: 175 / 248

TMM-200
Installation of RO elements
TORAY REVERSE OSMOSIS ELEMENTS section page:
7/11
Operation, Maintenance and Handling Manual rev.: 105
Version: October 2012
facilitate installation of elements (especially with longer pressure vessels
containing multiple elements). Consider using approximately 100 ml of glycerine
for each pressure vessel. If the viscosity of the glycerine is too high, dilute with
clean water as needed for better lubrication.
Limit ingress of foreign matter, dust and dirt to vessels to a minimum by only
opening/ closing one vessel at a time.
Use of a clean, soft mop or swab or similar tool will enable lubrication of the full
length of the vessel. Take care not to scratch the inner surface of the pressure
vessel.
After lubricating brine seals and vessel’s inner surface with glycerine, insert
element from feed side end into the pressure vessel. Approximately 2/3 of its
length should be in the vessel, and 1/3 outside the vessel (see Illustration
TMM-200.2), Insert element carefully and smoothly, especially the first element.
Illustration TMM-200.2: Insertion of first element
Page 12
Coral Sea Owner's Manual
Page 7 of 24