Parker Coral Sea, Руководство пользователя

Страница: 138 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 102 of 129
From the ‘Emergency Sensor Override’ screen it is possible to disable system sensors by pressing on the
associated sensor button, as you press the button the buttons face changes to reflect the current
operational state of the associated sensor.
It is not possible to disable both the low pressure sensor and the low pressure switch at the same time.
If you attempt to do this, the button to the second device being disabled will become un-responsive.
Each time you disable a sensor the system fault light will begin to flash, this indicates that a ‘System
Performance Warning’ has been raised. Once you exit the ‘Emergency Sensor Override’ screen the
control system will provide you with a performance warning prompt so you can review new messages as
shown below:
Pressing ‘Ignore’ clears the performance warning; pressing ‘Show Log’ will open the performance
warning log window where details concerning the detected problem are given as shown below:
Press here
to ignore
Press here to
review error
Coral Sea Owner's Manual