Parker Coral Sea, Руководство пользователя, Страница: 93 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 57 of 129
Pressing ‘Select’ will highlight the first alarm item.
Pressing ‘Move Up’ will scroll up through the alarm list
Pressing ‘Move Down’ will scroll down through the alarm list
Pressing ‘Accept’ will clear the listed alarm notifications.
Pressing ‘Back’ will exit the alarm list. Please note the ‘Back’ button is only active if no faults or errors
are currently displayed, if errors or faults are displayed, press ‘Accept’ to exit this screen.
It will also de-activate the product diversion valve, deactivate the product auxiliary pump, and place the
UV Sterilizer system into a shutdown routine (if fitted). If acceptable salinity levels are detected once
again, the control system will activate the UV Sterilizer warm up routine (if fitted), and when
appropriate re-activate the product water diversion valve. The system will remain in this cycle until
shutdown by the operator or until a system fault is detected.
If the product diversion valve cycles 8 times within a 60 minute period, the control system will issue a
performance warning message detailing the problem; it is advisable to check system settings at this time
to ensure optimum performance. This type of message is usually generated when system pressures are
insufficient to generate acceptable potable water given the quality of the current feed water.
Pressing ‘Ignore’ clears the performance warning; pressing ‘Show Log’ will open the performance
warning log window where details concerning the detected problem are given as shown on the next
page:
Press here
to ignore
Press here to
review error
Coral Sea Owner's Manual