Parker Coral Sea, Руководство пользователя

Страница: 80 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 44 of 129
6. Manual Shutdown
To stop the system at any point within manual mode operation simply press the ‘Auto-Stop’ button, all
pumps will stop simultaneously and all activated valves will be requested to return to their home
positions. If any valve fails to activate properly the control system will raise performance warning
messages or system fault messages detailing the problem(s). Once all pumps have successfully stopped
the control system will activate the fresh water flush (if fitted).
To perform a phased stop of the system in manual mode, individually turn off running pumps. To
prevent fault screens from being displayed, it is advisable to shut the pumps down in the reverse order
in which they were started.
Turn off the product pump (if fitted), turn off the high pressure pump, when doing so the control system
will attempt to return the domestic product water diversion valve to its home position. If this valve fails
to activate properly the control system will raise a performance warning message detailing the problem.
Pressing ‘Ignore’ clears the performance warning; pressing ‘Show Log’ will open the performance
warning log window where details concerning the detected problem are given as shown on the next
page:
Press here
to ignore
Press here to
review error
Coral Sea Owner's Manual