Parker Coral Sea, Руководство пользователя

Страница: 158 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 122 of 129
19.12 Activating the backwash cycle manually while in standby mode
If your system is currently in standby mode you can initiate a backwash cycle by pressing panel button
#11 ‘Back Wash Status’ (illustrated on page 7), once you press this button the controller touch screen
will display the following screen as shown on the next page:
If you wish to cancel your request to initiate the backwashing cycle at this time press the ‘Cancel
Request’ button, doing so will cancel the above screen and return you to the previously displayed screen
If you do not wish to initiate a backwash or cancel the request within 60 seconds this screen will self
cancel. If you wish to initiate the backwashing procedure press the ‘Backwash Now’ button on the touch
screen or press panel button #11 ‘Back Wash Status’ again.
Once you press either panel button #11 or the ‘Yes’ button on the touch screen the system will begin an
automatic backwashing sequence, once the sequence has completed the water maker will return to
standby mode.
Press Here To
Cancel Request
Press Here To
Start Backwash
Coral Sea Owner's Manual