Parker Coral Sea, Руководство пользователя

Страница: 174 / 248

TMM-200
Installation of RO elements
TORAY REVERSE OSMOSIS ELEMENTS section page:
6/11
Operation, Maintenance and Handling Manual rev.: 105
Version: October 2012
Insertion of elements
This is best done by a team of two persons.
Verify position and direction of the V-shaped brine seal as in illustration
TMM-200.1.
Illustration TMM-200.1: Orientation of brine seal
If not already performed, open the RO pressure vessel's feed side
This procedure can be prepared by removing any head locking devices, prior to
starting unpacking of elements, if site conditions allow this.
Lubricate the inside of RO pressure vessel with water and glycerine. This will
Only one brine seal per element is required. Do NOT
install two. The brine seal is typically fitted at the feed
end of the element.
Page 11
Coral Sea Owner's Manual
Page 6 of 24