Parker Coral Sea, Руководство пользователя, Страница: 152 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 116 of 129
19.5 Auto MMF Differential Pressure (PSI):
This value stated in PSI determines at what differential pressure the controller will initiate an automatic
backwashing of the multi-media filter assembly. Once the measured differential pressure reaches this
set point the control system will initiate a shutdown timer (if operating in automatic mode) or display a
performance warning (if operating in manual mode).
Typical values entered here are 25 PSI in all applications
19.6 Booster Pump Min. Outlet Pressure (PSI):
This value stated in PSI determines what the minimum allowable outlet pressure of the booster pump is,
if the outlet pressure of the booster pump falls below this set point for a pre-determined period of time
the control system will shutdown the pump to protect it from damage.
Typical values entered here are 15 PSI in all applications
19.7 Booster Pump Low Output Operation Time (Seconds):
This value stated in seconds determines how long the booster pump is allowed to run with low output
pressure before the system considers this a fault. If the booster pump output is below the pre-
determined level for this entire amount of time the control system will shutdown the pump to protect it
from damage.
Typical values entered here are 30 seconds in all applications
Coral Sea Owner's Manual