Parker Coral Sea, Руководство пользователя

Страница: 71 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 35 of 129
Pressing ‘Select’ will highlight the first alarm item.
Pressing ‘Move Up’ will scroll up through the alarm list
Pressing ‘Move Down’ will scroll down through the alarm list
Pressing ‘Accept’ will clear the listed alarm notifications.
Pressing ‘Back’ will exit the alarm list. Please note the ‘Back’ button is only active if no faults or errors
are currently displayed, if errors or faults are displayed, press ‘Accept’ to exit this screen.
The operator must correct the situation before attempting to continue or restart the pump. To stop the
pump either turn the ‘Booster Pump’ operator back to the ‘Off’ position, or press the system ‘Auto-Stop’
button to stop all pumps simultaneously.
5.5 High Pressure Pump Activation:
Turn the ‘High Pressure Pump’ operator switch to the ‘Pump On’ position. If the optional feed pump is
fitted and running and the ‘Booster Pump’ is currently running, and no system faults are present, the
‘High Pressure Pump’ operator switch indicator will illuminate. If there are any problems preventing the
high pressure pump from operating the control system will raise a performance warning detailing the
problem.
Pressing ‘Ignore’ clears the performance warning; pressing ‘Show Log’ will open the performance
warning log window where details concerning the detected problem are given as shown on the next
page:
Press here
to ignore
Press here to
review error
Coral Sea Owner's Manual