Parker Coral Sea, Руководство пользователя

Страница: 74 / 248

[ CONTROL SYSTEM OPERATIONS MANUAL ]
May, 2015
Project: Doc: Version:
Parker Sea Recovery Coral Sea 1010016 01c
Document Name: Author: Page:
Control System Operations Manual AGE Page 38 of 129
to acceptable levels within the time allowed. The control system will automatically shutdown the water
maker to prevent damage and wasted electricity. If the operator does manually increase the pressure to
acceptable levels as requested the controller will begin to monitor product water salinity levels. Once
acceptable salinity levels are detected the controller will activate the UV Sterilizer for 30 seconds (if
fitted), if the UV sterilizer is not fitted the controller will skip this step. Once the UV Sterilizer has
completed its warm up cycle, or if the controller has skipped this step, it will then attempt to activate
the product water diversion valve. If the valve fails to activate properly the control system will raise a
performance warning message detailing the problem.
Pressing ‘Ignore’ clears the performance warning; pressing ‘Show Log’ will open the performance
warning log window where details concerning the detected problem are given as shown below:
Pressing ‘Select’ will highlight the first alarm item.
Pressing ‘Move Up’ will scroll up through the alarm list
Pressing ‘Move Down’ will scroll down through the alarm list
Pressing ‘Accept’ will clear the listed alarm notifications.
Press here
to ignore
Press here to
review error
Coral Sea Owner's Manual