80
Position refresh
：
The camera position will be refreshed at the designated time in the schedule.
1-256
：
The camera will move to the selected position from the preset position at the designated time
in the schedule.
Auto track permission
：
The auto track activation setting set on the [Auto track
setting] tab will be permitted during the period of the schedule.
Auto pan
：
The camera will start the auto-panning operation set on the [Position] tab at the designated
time in the schedule.
Patrol 1:
The camera will start the patrol 1 operation set on the [Position] tab at the designated time in
the schedule. This is enabled only when “Patrol 1” is set.
Patrol 2:
The camera will start the patrol 2 operation set on the [Position] tab at the designated time in
the schedule. This is enabled only when “Patrol 2” is set.
Patrol 3:
The camera will start the patrol 3 operation set on the [Position] tab at the designated time in
the schedule. This is enabled only when “Patrol 3” is set.
Patrol 4:
The camera will start the patrol 4 operation set on the [Position] tab at the designated time in
the schedule. This is enabled only when “Patrol 4” is set.
Preset sequence 1:
The camera will start the preset sequence 1 operation set on the [Position] tab
at the designated time in the schedule. This is enabled only when “Preset sequence 1” is set.
Preset sequence 2:
The camera will start the preset sequence 2 operation set on the [Position] tab
at the designated time in the schedule. This is enabled only when “Preset sequence 2” is set.
Preset sequence 3:
The camera will start the preset sequence 3 operation set on the [Position] tab
at the designated time in the schedule. This is enabled only when “Preset sequence 3” is set.
Note
• Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (“Configure the
settings relating to the user authentication [User auth.]”) and “Off” for “Host auth.” on the “Host
auth.” page (“Configure the settings relating to the host authentication [Host auth.]”) to validate “Access
permission”.
• When selecting “Recording to SD(Recording stream)”, select “Stream(1)”, “Stream(2)”,
“
Stream(3)”, or
“Stream(4)” for “Recording format” on the [SD memory card] tab and select
“
Schedule” for “Save trigger”.
([Save trigger]) <SD memory card supported models only>
