110
43.3 Play back images on the SD memory card
Regardless of the resolution of the images saved on the SD memory card, they will be displayed in the
size determined according to the “Image capture mode” and “Recording format” settings on the playback
page. Therefore, it may look grainy on the playback page.
Image capture mode
Video compression method
Playback size
Corridor
All
640×360
Fisheye
＋
Corridor
「
JPEG(1)
」
or
「
Stream(1)
」
480×480
「
JPEG(2)
」
or
「
Stream (2)
」
VGA
*While recording to the SD memory card, the playback refresh interval may slow down.
43.4 Set preset position
The preset position settings for “Corridor” and “F Corridor” are the same as for “Double
panorama” and “F Double panorama” respectively.
For the initial position setting of the corridor image, you can adjust it by 90° to the left and right by clicking
the [Position adjust] button. The left and right corridor images then move together.
43.5 Set motion detection
The motion detection settings when the image capture mode is Corridor are the same as for “Double
panorama” except for the following.
・
Two motion detection areas can be set for each of the left and right images (left: “1 (white)” “2 (blue)”,
right: “3 (green)” “4 (red)”).
・
When the entire area is selected, “1 (white)” and “3 (green)” of “Area” are set.
43.6 Set scene change detection
The scene change detection settings when the image capture mode is Corridor are the same as for
“Double panorama” except for the following.
・
You can set one scene change detection area for each of the left and right images (left: “white”, right:
“green”).
