61
•
Name w/time&date:
File name will be [“Entered file name” + “Time and date (year/ month/ day/ hour/
minute/ second)” + “Serial number (starting from 00)”].
•
Name w/o time&date:
File name will be the characters entered for “File name” only. When “Name w/o
time&date” is selected, the file will be overwritten each time a file is newly transmitted.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & ; : / * < > ? ¥ |
•
Default:
None (blank)
Note
• When “Name w/time&date” is selected, the file name will be [“Entered file name” + “Time and date
(year/ month/ day/ hour/ minute/ second)” + “Serial number (starting from 00)”] + “s” during summer
time.
[Transmission interval]
Select the interval for the periodic image transmission from the following.
1s/ 2s/ 3s/ 4s/ 5s/ 6s/ 10s/ 15s/ 20s/ 30s/ 1min/ 2min/ 3min/ 4min/ 5min/ 6min/ 10min/ 15min/ 20min/
30min/1h/ 1.5h/ 2h/ 3h/ 4h/ 6h/ 12h/ 24h
•
Default:
1s
[Image capture size]
Select the image capture size of images to be transmitted from the following.
JPEG(1)/JPEG(2)
•
Default:
JPEG(2)
SFTP
server setting
Note
• When [Transmission protocol] is set to FTP, the SFTP server setting is unavailable
[SFTP server address]
Enter the IP address or the host name of the SFTP server.
•
Available number of characters:
1 - 128 characters
•
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
IMPORTANT
• When entering the host name for “SFTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (→“Configure the network settings [Network]”)
[Port number]
Enter a control port number to be used for the SFTP server.
•
Available port number:
1-65535
•
Default:
22
The following port numbers are unavailable since they are already in use.
20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
