20
Alarm: Configure the alarm function type (Alarm function type setup
menu)
(Operating Instructions – Use Easy Setup [Easy Setup] – Configure an event action [Event
action] – Alarm: Configure the alarm function type (Alarm function type setup menu))
Select the alarm function type as “SFTP transfer” or “SD memory recording”.
Configure “Recording format” of SD memory recording triggered by an alarm occurrence.
[Trigger]
• SFTP transfer
: When an alarm occurs, performs SFTP Transfer of the JPEG image.
• SD memory recording
: When an alarm occurs, records the image to the SD memory card.
Note
• “SFTP Transfer” for when an alarm occurs and “SFTP periodic image transmission” can both be
performed simultaneously.
• If both “SFTP Transfer” for when an alarm occurs and “SFTP periodic image transmission” are set,
“SFTP Transfer” will be given priority when an alarm occurs.
[Recording format]
Select the recording format by selecting from “JPEG(1)”, “JPEG(2)”, “Stream(1)”, “Stream(2)”,
“Stream(3)” and “Stream(4)”.
[Next] button
If you select “SFTP Transfer” for “Trigger” and click the [Next] button, the SFTP transfer setup menu will
be displayed.
(→
“Set SFTP transfer (SFTP transfer setup menu)”)
If you select “SD memory recording” for “Trigger”, select “JPEG(1)” or “JPEG(2)” for “Recording format”,
and then click the [Next] button, the JPEG recording setup menu will be displayed. (→
Configure SD
memory recording (JPEG) (JPEG recording setup menu))
If you select “SD memory recording” for “Trigger”, select “Stream(1)”, “Stream(2)”, “Stream(3)”, or
“Stream(4)” for “Recording format”, and then click the [Next] button, the video recording setup menu will
be dis
played. (→“
Configure SD memory recording (H.265 or H.264) (video recording setup menu)”)
Note
• If you click the [Next] button, the setting items in the screen are saved.
• Even when the audio detection alarm is set, alarm recording onto the SD memory card will not be
performed.
[Back] button
If you click the [Back] button the alarm setup menu will be displayed.
(→Alarm:
“Configure the terminal
and VMD (alarm setup menu)”)
