95
Image quality
0
1
2
3
4
5
6
7
8
9
Image
capture
size
1920x1080
9
9
9
9
10
10
10
20
30
40
1280x960
5
6
7
8
10
10
10
20
30
40
1280x720
7
8
10
10
10
20
20
30
40
50
VGA
10
20
20
30
30
40
50
50
50
50
640x360
20
30
40
50
50
50
50
50
50
50
QVGA
40
50
50
50
50
50
50
50
50
50
320x180
50
50
50
50
50
50
50
50
50
50
[Post alarm]
•
Transmission interval
Select the transmission interval for the alarm image transmission from the following.
When 60fps mode, 30fps mode or 15fps mode is selected for [Image capture mode]:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps
When 50fps mode, 25fps mode or 12.5fps mode is selected for [Image capture mode]:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2fps/ 3fps
•
Default:
1fps
•
Number of images
Select the number of images to be transmitted from the following.
1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/
200pics/300pics/ 500pics/ 1000pics/ 1500pics/ 2000pics/ 3000pics
•
Default:
100pics
•
Recording duration
Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.
Note
• If the resolution of the image to be transmitted is set to JPEG(1), and the JPEG(1) resolution is larger
than “1920×1080”, the maximum refresh interval will be 1fps.
• If the refresh interval is higher than 1fps, the maximum number of pre-alarm images is 10.
[Image capture size]
Select the image capture size of images transmitted when an alarm occurs from the following.
JPEG(1)/JPEG(2)
•
Default:
JPEG(2)
Alarm setting (server 2)
＜
Terminal input/output supported models only
＞
[Alarm image transmission]
Select “On” or “Off” to determine whether or not to transmit images when an alarm is detected.
•
On:
Transmits an image to the server when an alarm has occurred.
•
Off:
Does not transmit an image to the server when an alarm has occurred.
•
Default:
Off
