79
34. Change “SFTP periodic image transmission” to “FTP/SFTP periodic
image transmission” in “Schedule” mode
(Configure the settings relating to the schedules [Schedule])
By changing the FTP/SFTP function of SFTP function, “SFTP periodic transmission” in “Schedule mode”
of schedule setting was changed to “FTP/SFTP periodic transmission”.
[Schedule mode]
Select an action to be assigned to the schedule from “Schedule mode”.
“Off” is selected at the default
•
Off:
No action will be taken for the respective schedule.
Alarm permission <Terminal input/output supported models only>
•
Alarm permission (Terminal alarm 1, 2, 3):
Alarm input (terminal alarm) will be allowed during the
period of the schedule.
•
Alarm permission (Terminal alarm 1):
Terminal 1 alarm input will be allowed during the period of the
schedule.
•
Alarm permission (Terminal alarm 2):
Terminal 2 alarm input will be allowed during the period of the
schedule.
•
Alarm permission (Terminal alarm 3):
Terminal 3 alarm input will be allowed during the period of the
schedule.
•
VMD permission:
The video motion detection (VMD) function will be active during the period of the
schedule.
•
SCD permission:
The scene change detection (SCD) function will be active during the period of the
schedule.
•
Audio detection permission:
The audio detection function will be active during the period of the
schedule.
•
Access permission:
Users whose access level is set to “2. Camera control” and “3. Live only” on the
[User auth.] tab.
•
Recording to SD (Recording stream):
The SD recording will be performed at the designated time in
the schedule. Further, the “Recording format” is enabled only when there is a stream.
<SD memory card supported models only>
•
Image adjust 1: Scene 1:
Images are set to the image settings of “Scene file 1” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 2: Scene 2:
Images are set to the image settings of “Scene file 2” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 3: Scene 3:
Images are set to the image quality settings of “Scene file 3” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
Image adjust 4: Scene 4:
Images are set to the image quality settings of “Scene file 4” at the
designated time in the schedule. Once designated time in the schedule is over, the image quality setting
is set to “Scene file is not applied”.
•
FTP/SFTP periodic image transmission:
FTP/SFTP periodic image transmission will be performed at
the designated time in the schedule.
•
E-mail permission:
While the schedule is set, e-mail notification is sent when alarm is input.
•
Reboot:
The camera reboots at the scheduled time. Can only be selected with Schedule 5 or Schedule
8.
The following functions are unique for PTZ camera
＜
PTZ S
only
＞
