99
IMPORTANT
•
When entering the host name for “SFTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (
→“Configure the network settings [Network]”)
[Port number]
Enter a control port number to be used for the SFTP server.
•
Available number of characters:
1-65535
•
Default:
22
The following port numbers are unavailable since they are already in use.
20, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Host key hash]
Enter the hash value of the public key of the SFTP server.
•
Available number of characters:
43 - 44 characters
•
Available characters:
Alphanumeric characters, +, /,
=
[User name]
Enter the user name (login name) to access the SFTP server.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & : ; ¥
[Password]
Enter the password to access the SFTP server.
•
Available number of characters:
0 - 32 characters
•
Unavailable characters:
" &
FTP server setting
FTP server 1 setting
FTP server 2 settings
＜
Terminal input/output supported models only
＞
Note
•
When [Transmission protocol] is set to SFTP, the FTP server setting is unavailable.
[FTP server address]
Enter the IP address or the host name of the FTP server.
•
Available number of characters:
1 - 128 characters
•
Available characters:
Alphanumeric characters, the colon (:), the period (.), the underscore (_), and
the hyphen (-).
IMPORTANT
•
When entering the host name for “FTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (
→ “Configure the network settings [Network]”)
