83
36.1 Perform management of the extension software and the schedule
setting [Ext. software]
Management of the extension software and the schedule setting can be performed on the “Ext. software”
page.
The “Ext. software” page has the [Software mng.] tab, [Operation sched.] tab, and the [Control log] tab.
36.2 Perform the installation, uninstallation and version upgrade
of the extension software [Software mng.]
Click the “Software mng.” tab of the “Ext. software” page. (For menu display and how to operate, refer to
“How to display the setup menu” and “How to operate the setup menu”.)
Installing the extension software
1
Save the extension software to be installed in the PC
.
IMPORTANT
• Check [Remaining ROM] and [Remaining RAM] of the camera. If the Remaining ROM or RAM is not
enough to install the extension software, it is necessary to uninstall the other extension software that is
already installed. Refer to “[Uninstall] button” for how to uninstall the software.
2
Click the [Choose File] button and designate “Ext. software”.
3
Confirm that “Install new Ext. software” is selected and then click the [Execute] button. Installation of
the extension software will start. When the installation is completed, the name of the installed extension
software will be added to the “Software mng.” screen
.
IMPORTANT
• A space cannot be used in the name of the saving directory.
• Be sure to use the designated file (extension: ext).
• Do not turn off the power of the camera during the installation process.
• Do not perform any operation during the installation process and wait until it completes.
4
Obtain the registration key number and register the registration key.
Note
• Depending on the type of extension software, you may need to register the registration key. For
information on how to obtain and register the registration key, refer to the instruction manual of the
extension software.
• After registering the registration key, the camera will restart. After the camera restarts, make sure
that the registration key is registered before setting the extension software.
