91
38. Add HTML initialization function
(Operating Instructions – Reset the settings/Reboot the camera [Default reset]
[Load the default HTML files (setup menu).] and [Reset to the default and load the default
HTML files.] have been added to the [Default reset] tab.
The settings and the HTML data of the camera can be initialized and reboot of the camera
can be performed on this page.
［
Reset to the default (Except the network settings)
］
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be
reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
［
Load the default HTML files (setup menu).
］
Click the [Execute] button to reset the HTML files to the default.
It is impossible to operate the camera for about 3 minutes after the initialization.
［
Reset to the default and load the default HTML files.
］
Click the [Execute] button to reset the settings of the camera and the HTML files to the default. Note that
the network settings will not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
［
Reboot
］
Click the [Execute] button to reboot the camera.
It is impossible to operate the camera for about 2 minutes after rebooting the camera.
Note
• Refer to the supplied Installation Guide for more information about initializing the network settings.
• If “Diag.” of the alarm or e-mail notification function is selected, a notification of error will be sent to
“Destination E-mail address” or to “Destination of notification” when an error such as no SD memory
card insertion after the reboot or a locked SD memory card insertion occurs.
